This is conventional type fire alarm control panel, it have 2 zone, each zone can connect 25pcs 2 wire devices, such as smoke detector, heat detector, pull station, etc. Suit for home, small factory, small hotel, etc.
ANKA Sci-Tech Co.,Ltd is one of the leading China hotel fire alarm fire detection and alarm system manufacturers and suppliers, and also a professional company equipped with productive factory, we supply hotel fire alarm fire detection and alarm system with high quality and competitive price.
An automatic fire alarm system – in general is made up of smoke, heat & other detectors, manual call points, audible warning devices, fire alarm control panels with remote notification capability, which can supply early warning of a developing fire. Such a system, on the other hand, is unable to assure protection against property damage or loss of life resulting from a fire. The manufacturer recommends that smoke and/or heat detectors must be positioned throughout a protected premise following the recommendations of the current edition of the EN Standard, manufacturer’s recommendations contained in the Guide for proper Use of System Smoke Detectors, which is made available at no charge to all installing dealers. A study by the Federal Emergency Management Agency (an agency of the United Europe) indicated that smoke detectors may not go off in as many as 35% of all fires. A fire alarm system may not provide timely or sufficient notice, or might not function, for a diversity of reasons: Smoke detectors may not sense fire where smoke cannot reach the detectors such as in chimneys, in or behind walls, on roofs, or on the other side of closed doors. Smoke detectors also may not sense a fire on another level or floor of a building. A second-floor detector, for example, may not sense a first-floor or basement fire.
AC 120VAC 50/60 Hz Power supply rating
240VAC 50/60 Hz
Power supply rating
2 Amps @ 24VDC
Maximum Battery Charging Current
0.98 Amps @ 26VDC
Initiating Device Circuits 2 Zones
Alarm Zone 2
Normal Initiating Operating Voltage
23VDC, Maximum 26VDC, regulated
Normal Quiescent Current (normal status)
Alarm Current (not include the others)
Short Circuit Initiating Current (per zone)
Maximum Initiating Resistance (per zone)
Initiating End-of-Line Resistor
4K7 ohms, 1/2W 5%
Standby Detector Current (per zone)
Maximum Detector Count (per zone)
Initiating Cabling Type
18AWG Twisted Shielded pair (14 – 18 AWG)
Detector Base Impedance
Notification Appliance Circuits
1 NACs, Special Application
Maximum NAC Current Rating
1 Amp maximum per circuit
NAC Operating Voltage
26VDC Nominal, 30VDC Maximum
NAC End-of-line Resistor
FAULT Relay rating
2A & 30VAC, resistive
Alarm( Auxiliary ) Relay rating
2A & 30VAC, resistive
CP1002M (Master alarm panel)
With power supply and digital display
CP1002S (Slave alarm panel)
With power supply ,without digital display
CP1002W(Slave alarm panel)
With power supply, without digital display
why choose us?
- 2000 square meters factory, have capability to supply wide range of products
- Good quality control ,with competitive prices.
- Prompt delivery.
- Good after-sales service.
- No Minimum order quantity limited. OEM and ODM are also accepted.
- We locate in Shenzhen of China, easy for export.
1.We guarantee that all our items are "as stated" in their descriptions. We strive for 100% customer satisfaction on every sale we complete.
2.We are manufacture, there is no middle man, no high markup, so we can provide quality items yet very competitive price.
3.If you have any questions please contact us first, most are responded within 12 business hours.
1. All package can sent by FedEx/DHL/UPS/EMS, based on customer requires.
2. Freight By Sea to Any nearest port of customer country.
3. Freight by Air to airport of import country.
ANKA is a high-tech enterprise specializing in the whole process of Research, Development, Manufacture and Marketing security alarm products. With the company policy of "Innovative technology, Makes safe life" and the responsibility of "Progress for protecting people's safety".
1. Quality of our company.
We are the manufacturer of alarm system for more than 10 years, we are full of experience and technology.
2. Quality of our products.
Our engineers who ever worked in a very famous company of alarm system, all the products must be strictly inspected before selling.
3. Quality of our services.
All of our products have a full two-year warranty and low repair rate.
4. Quality of your shipment.
We arrange the shipment as soon as we get the payment, quickly and professionally.
5. Quality of our sales representatives.
Truly, Warmly, Patiently, Professionally.